Laboratory research and pharmacy compounding inside a biological safety cabinet (BSC) are tedious work. Proper laboratory ergonomics is a must for laboratory personnel. A properly design BSC can help minimize stress resulting in better research results. If you have an existing BSC adding simple accessories such as a footrest or elbow rest can make a huge difference. Read these ten ergonomic tips for working in your biosafety cabinet to help reduce workplace injuries.
[Video] In-VitroCell CO2 Incubator Closed Loop HEPA Filtration
In-VitroCell CO2 Incubators by NuAire use closed loop HEPA filtration to minimize contamination by creating...
Other content in this Stream
[Bulletin] Care and Use of Copper Surfaces
NuAire lab products manufactured with copper such as CO2 Incubators have specific care and use instructions to assure maximum customer satisfaction.
[Webinar] Biosafety Cabinet Introduction
Learn some of the basic about biosafety cabinets and how to go about selecting the right bsc for your application.
[Spec] NU-677 Class II, Type A2 Animal Handling Biosafety Cabinet Specification (115V)
[Spec] NU-481E Specification (230V)
[Spec] NU-481 Specification (115V)
[Spec] NU-540E Class II Microbiological Safety Cabinet (230V)
[Spec] NU-540 Class II, Type A2 Biosafety Cabinet (115V)
[Spec] NU-543E Class II Microbiological Safety Cabinet (230V)
[Spec] Class II, Type B2 Biosafety Cabinet NU-430 Specification (115V)
LabGard model NU-430 Class II, Type B2 Total Exhaust Biosafety Cabinet specification.
[Spec] Class II, Type B1 Biosafety Cabinet Model NU-427 Specification (115V)
View specifications for NSF/ANSI 49 listed LabGard Model NU-427 Class II, Type B1 Biosafety Cabinet.
[White Paper] Use of HEPA Filters in Biosafety Cabinets
Learn about the use of HEPA filters in biosafety cabinets.
[Flyer] Mini Microcentrifuges
Mini Microcentrifuges from NuAire Laboratory Equipment are available in three different models all at varying maximum speeds.
[Flyer] NuAire Research Laboratory Equipment Line Card
[Brochure] LabGard AIR NU-543 Class II, Type A2 Biosafety Cabinet
LabGard AIR Model NU-543 Class II, Type A2 Biosafety Cabinet provides long lasting personnel, product, and environmental protection through advanced construction techniques and electronic controls.
[Spec] NU-PR797 Specification (115v)
[Brochure] In-VitroCell CO2 Incubator
In-VitroCell CO2 Incubators from NuAire provide optimal growth conditions for your cells. Available in direct heat and water jacket with popular upgrades such as O2 control, RH Control, and more.
[Bulletin] Clarifying the Class II, Type C1 Biosafety Cabinet
The Class II, Type C1 Biosafety Cabinet (BSC) is similar to a Type B1 regarding airflow pattern. The Type C1 has a portion of the work surface to exhaust air.
[Specification] NU-5800 Series Direct Heat CO2 Incubator
Learn the technical side of the NU-5800 Series Direct Heat CO2 Incubator. Dimensions, performance, and more.
[Spec] In-VitroCell NU-5700 Series CO2 Incubator Specification
Purhcase specifciation for CO2 Incubator Series In-VitroCell NU-5700.
[Spec] Class I Containment Ventilated Enclosure NU-813 (115V, 230V)