[Instructions] CO2 Incubator Copper Water Pan NU-5860 Instructions

January 16, 2018

CO2 Incubator Copper Water Pan NU-5860 InstructionsNuAire recommends the use of this CO2 Incubator humidity water pan for when copper components are desired as a part of the chamber contamination control. Place the pan on the bottom of the incubator chamber. The pan should be surface disinfected before usage with 70% alcohol or similar disinfectant. Fill with single deionized or distilled water (No purer than 1 mega ohm). No other additives are required for effective antimicrobial properties.

Previous Flipbook
[Instructions] NU-1553 CO2 Incubator Stacking Table Operation and Maintenance Manual
[Instructions] NU-1553 CO2 Incubator Stacking Table Operation and Maintenance Manual

The NU-1553 stacking table is designed to support a second Autoflow or In-VitroCell CO2 Incubator over the ...

Next Flipbook
[Instructions] NU-1582 Mobile Platform for CO2 Incubators
[Instructions] NU-1582 Mobile Platform for CO2 Incubators

The NU-1582 Mobile Platform for CO2 Incubators features leg leveling casters adding mobility for lab reorga...